Technologies to Detect Li-Ion Cells Thermal Failure – AZoM

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Several lithium-ion (Li-ion) cells undergo thermal runaway each year. Thermal runway refers to a catastrophic failure wherein all electrical and chemical energy in the cell is rapidly released as heat. Many of these events occur without apparent cause and under normal operating conditions, though research into thermal runaway blames mechanical, thermal, or electrical abuse to a cell.¹
These unexplained thermal runaway events can be disastrous, ranging from explosions at Li-ion energy storage systems (ESSs) to unplugged cars exploding in their owners’ garages. Deploying robust monitoring and detection technologies in Li-ion systems is the only way to curtail events like this effectively.
The Chinese government has issued strict guidelines on the function and inclusion of thermal runaway detection systems inside electric vehicles.^2–4 It is mandated by such guidelines that five minutes before a hazard occurrence in the passenger compartment, any electric vehicle system must provide a warning of a thermal runaway event.
Though there have been similar safety measures for electric vehicles outlined in UN guidelines, these remain just guidelines, and there are no legal requirements within the United States around thermal runaway detection.⁵
To define constraints and operating conditions for thermal runaway detection, Amphenol Advanced Sensors works closely with research labs and OEMs worldwide.
There are stringent performance requirements for thermal runaway detection systems.
Passenger safety is critical in electric vehicle (EV) applications. Any thermal runaway event must be detected long before it poses any hazard to the vehicle’s inhabitants.
Stable operation must be provided by a thermal runaway detection system throughout the entire service life of a battery pack, which in automobile applications can run as high as 10-15 years.
To power auxiliary systems such as keyless entry and alarms, electric vehicles typically deploy a 12 V secondary battery system, which can markedly restrict the power draw of a thermal runaway detection system. To avoid depleting this secondary battery system, a robust thermal runaway detection system must have a very low current draw.
Electric vehicles and energy storage systems commonly use different cell geometries and configurations and one of several different battery electrochemistries. Thermal runaway detection solutions must provide reliable detection regardless of any battery system and be agnostic to all of these.  
The final factor essential for a thermal runaway detection system is the cost. Installation of a $10,000 detection system with a $5,000 battery pack is not feasible for an OEM. It is crucial instead for the detection system to be consistent with typical sensor costs in EV applications, putting them in the range of tens of dollars.
Research into thermal runaway events has shown that gas sensors provide notable advantages in detecting the early warning signs of thermal runaway. Gas sensors also have the benefit of low cost, low power consumption, and small footprints, as well as providing rapid early detection compared to parameters such as temperature and cell voltage which respond slowly to cell venting.
The Robust Early Detection of Thermal Runaway (REDTR) system from Amphenol has been designed based on gas detection technology. It detects concentrations of flammable gases vented early during Li-ion cell failure to provide an accurate warning of impending thermal runaway within seconds.
The battery management system (BMS) is enabled by this quick response to protect vehicle occupants, engage countermeasures, and provide warnings to nearby personnel in energy storage system applications.⁶
From a single cell within a battery pack, REDTR provides fast and accurate detection of cell venting regardless of configuration, cell size, and electrochemistry. REDTR can be used as a standalone device or integrated directly into BMS architecture, with a compact form factor and a demonstrated performance life of up to 20 years.
To learn more about the thermal runaway detection sensor REDTR from Amphenol, contact the team today.

This information has been sourced, reviewed and adapted from materials provided by Amphenol Advanced Sensors.
For more information on this source, please visit Amphenol Advanced Sensors.
Please use one of the following formats to cite this article in your essay, paper or report:
APA
Amphenol Advanced Sensors. (2022, November 23). Technologies to Detect Li-Ion Cells Thermal Failure. AZoM. Retrieved on November 24, 2022 from https://www.azom.com/article.aspx?ArticleID=22030.
MLA
Amphenol Advanced Sensors. "Technologies to Detect Li-Ion Cells Thermal Failure". AZoM. 24 November 2022. <https://www.azom.com/article.aspx?ArticleID=22030>.
Chicago
Amphenol Advanced Sensors. "Technologies to Detect Li-Ion Cells Thermal Failure". AZoM. https://www.azom.com/article.aspx?ArticleID=22030. (accessed November 24, 2022).
Harvard
Amphenol Advanced Sensors. 2022. Technologies to Detect Li-Ion Cells Thermal Failure. AZoM, viewed 24 November 2022, https://www.azom.com/article.aspx?ArticleID=22030.
Do you have a question you’d like to ask regarding this article?
Cancel reply to comment
Seokheun Choi
AZoM speaks with Seokheun “Sean” Choi, a Professor in the Department of Electrical & Computer Engineering at the State University of New York. His new research details the production of a prototype circuit board printed on a sheet of paper.
Dr. Anne Meyer / Dr. Alyson Santoro
In our latest interview, AZoM spoke with Dr. Anne Meyer and Dr. Alyson Santoro who are currently collaborating as part of Nereid Biomaterials. This group is creating a new biopolymer that can be broken down by bioplastic-degrading microbes in marine environments, bringing us closer to reducing the i
Kaan Toprak
This interview discusses how ELTRA, as part of Verder Scientific, produces elemental analyzers for the battery component space.
TESCAN launches its brand-new TENSOR system, a dedicated, near-UHV 4-STEM for multimodal characterization of nanoscale particles.
Discover 3D-Micromac's microFLEX™, a roll to roll laser system that can be used to process flexible substrates.
Spectrum Match is a powerful software program that allows the user to search through a custom-built spectrum library to find similar spectra.
AZoM.com – An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022

source